Establishing a boat factory in GCC

[Ahmed22]

Greeting all

Who can offer his help to set up a fiberglass small boat factory for 20 to 35 feet size in GCC?
Considering:

• The factory design, blueprint, and space requirements.
• The needed equipment.
• Molding requirement.
• The process guidelines and manuals.
• Selecting good quality materials to be utilized.

I will be glad and thankful to receive your advice & services at boatproject2024@gmail.com

Best regards
Ahmed

 

[TANSL]

Welcome to the forum.
Interesting project, could you send me your contact information? Thank you.

 

[bajansailor]

Re the GCC, I am guessing that this is the consortium of countries in the Gulf mentioned in the link below -
Gulf Cooperation Council - Wikipedia https://en.wikipedia.org/wiki/Gulf_Cooperation_Council

Whereabouts in the GCC are you?
There are already a number of well established boatbuilders in the GCC of 'small' craft in the size range that you are considering - it might be worthwhile making contact with them?
Either as a potential customer for one of their boats, or to see if they might be interested in a joint venture with you in your country?

Here is one - Smart Own in the UAE - Log into Facebook https://www.facebook.com/smartown.ae
And Passenger boats https://www.smartown.ae/

Google will find you some more boatbuilders.

 

[Ahmed22]

Thank you @bajansailor for your reply. I hire someone with such experience or consulting him.

 

[Ahmed22]

Thank you @TANSL for your reply. Kindly share with me your contact as a direct message.

 

[KD8NPB]

There’s some unique challenges working overseas.

My big suggestion I can have for you;
Make sure your bill of materials is accurate, so you can predict material consumption and lead times for fresh stock.

MRP software is an excellent investment for any industrial manufacturer.

I do offer consulting if you want to contact me via email.

richard@mic-sc.com

 

[rxcomposite]

Thank you @TANSL for your reply. Kindly share with me your contact as a direct message.

Seems your recent membership does not allow yet to send you a direct/private message. You must give a different account to contact you.

 

[rxcomposite]

Greeting all

Who can offer his help to set up a fiberglass small boat factory for 20 to 35 feet size in GCC?
Considering:

• The factory design, blueprint, and space requirements.
• The needed equipment.
• Molding requirement.
• The process guidelines and manuals.
• Selecting good quality materials to be utilized.

Best regards
Ahmed

From the brief, it seems a factory layout/design. The next question will be how big will the boat be? That will determine your turnaround rate (say 1 per week) and will answer question on the equipment you need.
Process is pretty straightforward but manuals? Is it factory Standard method/Operating procedures? It is like a Quality Procedure manual.

The last question I think will be "Will the boat be built to Class. or even just compliant with/to (ISO guidelines, others)". This will determine the type of materials to be used.

 

[Ahmed22]

Thank you Richad for your reply @KD8NPB. I will try to contact you.

 

[Ahmed22]

thank you @rxcomposite for your reply. kindly contact me at boatproject2024@gmail.com

 

[rxcomposite]

thank you @rxcomposite for your reply. I will try to contact you.

Thank you. I have established several start up companies and is available for consultations.

 

[Ahmed22]

Great @rxcomposite. kindly contact me at boatproject2024@gmail.com