Manual for a K&E Planimeter model 62 0022

[DCM]

Hi,

I am a YDS student and I picked up this planimeter on EBAY...the problem with it is that it doesn't come with an instruction manual...Does anyone have the same model that would be willing to photocopy the manual? I will pay all copy & mailing costs associated...

Thanks
Dan

 

[vinceduf]

Instruction Manual

Hi DCM,
I have just had a look at all my stuff in the office, and have found my old K + E planimeter as well as the instruction manual. For your knowledge those planimeters were built by Haff gebruders in Germany, where in case of problems, you still might get some spare parts:

http://www.haff.com

The manual I do have was printed for the all range of planimeters including your 620022 model. If you wish, I shall do a free scanned copy of it, and shall send you a pdf file, if you give me your e-mail address of course.........

So do not hesitate to write me back!.......
Cheers,

Vince

 

[DCM]

Thank You! I sent you a private message with my email & such...

Thanks again!
Dan

 

[Joelfp]

DCM
I also have a K&E 620022 planimeter without a manual. I wonder if you have a digital copy of the instruction manual. I found this link on the web so I don't know if it will reach you from the archives.
Joel

 

[bicarbon]

manual

http://www.haff.com/manual_31x/Manual317_315_313.pdf

 

[Joelfp]

K&E Planimeter Manual

Hi Bicarbon
Thank you for forwarding the manual on to me. The 300 series planimeters seem similar to the model 620022 so I presume the settings are the same and calculations are performed in the same manner. I will take a look through the manual...Thank you again, Joelfp