sloop

http://www.yacht.ro

Clear coated Mahogany cabin sole; mahogany tops and sides berths ; Moonlight opening ports; Stainless hardware teak@epoxy louvered door at forward bathroom compartment

it was before the advent of digital camera revolution. I designed the interior of this boat in a classic style. Looking aft through companionway doors made in teak (center); on both sides mahogany louvered doors cabinets; wich on the other side of the bulkhead act as consoles.

mahogany top charts&cofee desk teak louvered doors and hatch composite console portside sliding cold molded lateral windows opening front windows mahogany

I designed twin consoles into the bathroom at the forward section of the hull ; supporting the sink and acting as an extension of the bed on the cabin side of the bulkhead. the bulkhead is as well reinforcing the cabin. in order to make better use of the space at the companionway area I...

Two different rig options for motorsailing cat. Here a sloop with self-tacking camber-spar jib

transported by the 80 tons crane the old racer travels to new life.the restyoration and upgrading took two years three months. details on www.yacht.ro

transom was rebuilt and cold molded; the topsides were painted with epifanes; boottop painted blue; name is here being re-painted. this was the first restoration of this level ever performed in Romania

Lead ballast has been re-fastened by custom made bronze bolts, copper antifouling paint under the LWL; topsides were painted and polished, new dynel&epoxy deck painted antiskid, cabin and cockpit mahogany were clear coated .

High Performance Sloop with CBTF configuration plus lifting keel/rudder/forward rudder(foil)

High Performance Sloop with CBTF configuration plus lifting keel/rudder/forward rudder(foil)

High Performance Sloop with CBTF configuration plus lifting keel/rudder/forward rudder(foil)

High Performance Sloop with CBTF configuration plus lifting keel/rudder/forward rudder(foil)

Western Red Cedar "frameless" strip planking fiberglass &epoxy sheating 36 ft cruiser racer . Minimal framing is going to reinforce the hull; interior bulkheads acting as framing. Construction setup was strats by laminated keel and stem/ stern. The stern sections of this...

most framing , most floors and 70% planking were rebuilt in laminated ash epoxy capsulated; the hull was rolled on two massive wood wheels; in order to facilitate the cold molding of three layers veneer&west system epoxy over the hull; ease sanding and fairing work ;improve epoxy...

The Hampton One-Design is a beautiful looking and sailing boat that is comfortable for as many as four for day sailing. There are a lot of regattas of Hamptons on Chesapeake Bay.

first we took the paint off the entire hull and deck. the hull structure is resorcinol one layer of 10mm cold molded mahogany over inner 9mm spruce double planking hull ; ballast keel was removed ,by cutting off the 40mm diam steel keel bolts; rot areas detected, keel wood left to dry, all...