aluminium boat

Alu trawler yacht design from AMD team (Thailand)

Hey guys, There is different ways to route longitudinal stringers in aluminium (or steel) vessel. One method is so that they do not have any curvature inward towards the keel line (port side in the pictures). Another method is so that the stringers would turn toward the keel line of the boat...

16m ALUMINIUM EXPLORER Hybrid Electric Propulsion Andrei Rochian Architecture &Design https://www.youtube.com/watch?v=eaGs1BXJLdE&t=10s

-Total lenght:4600 (mm) - Beam: 1856 (mm) - Thickness of the side/bottom: 3/3 (mm) - The waight of the boat without engine: *aluminium parts: 232,73 (kg) *aluminium profiles:35,33 (kg) - Transom height:508 (mm) - Deadrise at transom:7 (degree) - Fuel tank:25 (liters) - Max hull load: 3...

Total lenght: 5589,24(mm) - Beam: 2272 (mm) - Thickness of the side/bottom:4/4 (mm) - The waight of the boat without engine:750 (kg) - Transom height:635 (mm) - Deadrise at transom:19 (degree) - Fuel tank:115 (liters) - Max hull load:450/5 people - Engine : 150 (HP) -Utilization aluminium...

Total lenght: 4999.24 (mm) - Beam:1880.31 /1958.83 (mm) hull/boat - Thickness of the side/bottom: 4/4 (mm) - The waight of the boat without engine: *aluminium parts: 342,83 (kg) *aluminium profiles: 22,33 (kg) - Transom height: 508 (mm) - Deadrise at transom: 6 (degree) - Fuel tank: 25...

Total lenght: 6235,75 (mm) - Beam: 2200 (mm) - Thickness of the side/bottom: 4/4 (mm) - The waight of the boat without engine: *aluminium parts: 624,44 (kg) *aluminium profiles:23,99 (kg) - Transom height: 508 (mm) - Deadrise at transom: 16 (degree) - Fuel tank: 60-80 (liters) - Max...

Hello everyone, For the purpose of small research in basic design I am kindly asking you to share your experience, data or guidelines you have about aluminium boat weight estimation. We are focused mainly on small craft 5 - 20 m for recreational purposes (mostly planing and semi-displacement...

9.6 m Aluminum Passenger tour boat 2x 225 hp Outboards Architecture&Design Andrei Rochian 12 passengers + Enclosed sanitary compartment Side to Side Wide cabin Passage to the bow by door + roof hatch at centre front cabin Stepped Hull High speed 45 knots video here...

hi guys , I will just start to work on an aluminium boat as captain. the boat is a "maxi class" boat. normally when i start a job as captain i try to survey the boat (hull, engine,rigging, electric system, plumping etc) but i dont have experience about aluminium hulls. If you guys can...

Hello, I am trying to figure how much aluminium sheets would a - 86x12 meter and 4 meter draft - ship need ? It would be a monohull as well. Thank you, SET Project

How to fabricate the aluminum boat at workshop; this is always the question asked most.

How to design a ship, how to design a ship in space engineers, how to design a cruise ship...etc. That is the question of many current students, as well as new graduates. Or those who are looking to learn about ship design, ship architects. In this video, I will briefly summarize the most...

Guys, I give you all some guilder in aluminium fabrication process. You can view others video with the good aluminium boat. Let view on video link And actual at site Thanks