Paint below the waterline of a houseboat

mariobrothers88

Senior Member
Joined
Sep 9, 2020
Posts
215
Reaction score
10
Location
San Diego, CA
Hi guys, what would you guys use for paint below the waterline of a houseboat made out of Marine plywood, fiberglass and epoxy? The houseboat won't ever move, it would be permanently anchored to one spot and it would be salt water environment. Would an antifouling paint be necessary given that it won't need to move? If not, what would you paint it with below the waterline?

Thanks for any advice or input!!!
 
Which part of the world is the houseboat in?
Perhaps San Diego.

Is it a new houseboat, new construction?

Any epoxy based bottom paint.
International makes a good one.
 
Ron-bottom paints are regionally formulated. So ask where you plan to moor what works there.

post draft-I worded this poorly...I meant to say certain regions use certain formulas....a paint used in the gulf may be different than Tijuana than Seattle than Lake Superior
 
Last edited:
Absolutely use anti-fouling.

And have it cleaned regularly.

Calcified marine growth is heavy and will increase the boats weight. Thus reducing its buoyancy. Sufficient growth will sink!
 
I should get arrested by the grammar police. Bottom paints are not regionally formulated. Certain regions prefer certain paints for various conditions.
 
I’d use a generous layer of barrier coat for starters, followed by non ablative bottom paint, applied extra thick, maybe twice the recommended thickness.
I see some permanent in-water structures with just coal tar epoxy applied, no anti fouling, they grow long beards.
 
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

  • Back
    Top