|
|
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors | Sitemap |
|
|
||
|
INDEX_________________________________VOLUME II___________________________________Page v
Page
Task 13. Horizontal Reinforcing Bars.................. 22
Task 14. Blanking-Out for Through-Hull Fittings.............. 22
Task 15. Starter Rods for Webs, Bulkheads Etc............... 22
Task 16. Starter Rods for Water Tanks and Rudder Bearing.......... 22
Task 17. Scuppers.......................... 23
Task 18. Last Four Layers of Mesh Reinforcing.............. 23
Task 19. Sheer-Line Screed...................... 24
Task 20. Blanking-Out Hull Guard Bolt-Holes............... 24
JOB 7 -STERN TUBE.......................... 25
Task 1. Stripping Out Keel Mold Frames................. 25
Task 2. Stringing Propeller Shaft Center Line............... 25
Task 3. Positioning Stern Tube, Welding Deadwood Reinforcing........ 26
JOB 8 -PLASTER HULL......................... 27
Task 1. Placing the Shelters...................... 28
Task 2. Erecting Plasterers' Scaffolding................. 29
Task 3. Preparing the Cement Mixer.................. 29
Task 4. Preparing the Water...................... 30
Task 5. The Mixer Man....................... 31
Task 6. Plastering the Hull...................... 32
Task 7. Cleaning Tools ....................... 34
JOB 9 - STEAM CURING......................... 35
Task 1. Before Steam Curing..................... 35
Task 2. Preparing the Steam Distribution Pipe .............. 36
Task 3. The Steam Tent....................... 36
Task 4. Temperature Control..................... 36
Task 5. The Steam Generator..................... 37
Task 6. Filling the Deadwood..................... 37
JOB 10 - ROLLING HULLS........................ . 38
Task 1. Transferring Waterline Marks to the Hull ............. 38
Task 2. Moving the Hulls to Rolling Site................. 39
Task 3. Bracing Hulls Athwartships for Rolling.............. 39
Task 4. Preparing the Rolling Slings .................. 40
Task 5. Supporting the Hull Level................... 40
JOB 11 - STRIPPING ANDGRINDING HULL INTERIOR............ 41
Task 1. Removing the Hull Mold Frames................. 41
Task 2. Removing the Mold Planking.................. 42
Task 3. Removing the Staple Ends .............................................................................. 42
Task 4. Finishing Touches and Clean-Up................. 42
JOB 12 - MESH AND RODS-INTERIOR BULKHEADS, STRINGERS, WEBS ............... 43
Task 1. Trimming and Straightening Starter Rods............. 43
Task 2. T-Bar Web and Bulkhead Screeds................ 44
Task 3. Forward Bulkhead Reinforcing................. 44
Task 4. Placing Inspection Hatches................... 45
Task 5. Placing Wheelhouse Base Frame................. 45
Task 6. Fish-Hold Webs and Stringers.................. 45
Task 7. Applying Mesh to Webs, Bulkheads, Etc............... 46
|
||
|
|
||