|
|
| Boat Design Forums | Boat Design Directory | Boat Design Gallery | Boat Design Book Store | Thanks to Our Site Sponsors | Sitemap |
|
|
||
|
Page vi_____________________________________VOLUME III_____________________________________INDEX
Page
Task 8. Preparing Apertures for Piping and Bilge Water........... 47
Task 9. The Deadwood Section.................... 47
Task 10. Preparing Deck Starter Rods.................. 47
JOB 13 - MAIN SHAFT AND BEARING ALIGNMENT............. 48
Task 1. Affixing Stern Cutlass Bearing ................. 48
Task 2. Affixing Propeller Shaft Stuffing Box............... 48
Task 3. Installing the Propeller Shaft.................. 48
JOB 14- INSTALLING RUDDER AND HYDRAULIC STEERING GEAR...... 50
Task 1. Installing Rudder Assembly .................. 50
Task 2. Installing Hydraulic Steering Gear................ 51
Task 3. Bracing the Hydraulic Steering Gear............... 52
JOB 15 - INSTALLING RUBBING STRAKES................. 53
Task 1. Removing Temporary Bolts from the Hull............. 53
Task 2. Installing Rubbing Strakes................... 53
JOB 17 - PLASTERING THE INTERIOR OF THE HULL............ 54
Task 1. Cleaning and Wetting the Hull Interior.............. 54
Task 2. First Areas to be Plastered................... 54
Task 3. Plastering Bulkheads and Webs................. 54
Task 4. Apertures and Corners .................... 55
Task 5. Hull Interior Skim-Coat.................... 56
JOB 17 - WATER TESTING AND REPAIRING................ 57
Task 1. Shoring Up Hulls for Water Test................. 59
Task 2. Filling Hulls with Water.................... 59
Task 3. Repairing Leaks....................... 59
Task 4. Draining Hulls........................ 59
Task 5. Repairing Damaged Hulls................... 59
STAGE 2- FABRICATION OF COMPONENT PARTS OF THE VESSEL........ 61
JOB 1 - FABRICATE FISH-HOLD..................... 61
JOB 2 - ORIGINS OF THE SUPERSTRUCTURE FRAMEWORK......... 65
JOB 3 - SHEATHING THE WHEELHOUSE.................. 71
Task 1. Leveling the Superstructure Framework.............. 71
Task 2. Checking Welds and Bolt-Holes................. 71
Task 3. Coating Superstructure Framework ............... 71
Task 4. Sheathing Wheelhouse Sides.................. 72
Task 5. Wheelhouse Roof Jig..................... 75
Task 6. Fitting Wheelhouse Roof ................... 76
Task 7. Fitting Butt Blocks...................... 79
Task 8. Priming Plywood Sheathing .................. 80
JOB 4 - FITTING OUT THE WHEELHOUSE: JOINERY............ 81
Task 1. Framing and Covering the Wheelhouse Floor............ 82
Task 2. Installing Wheelhouse Windows................. 86
Task 3. Canvas Covering for Wheelhouse................. 88
|
||
|
|
||