Tutorial Solidworks - Casco 12m - Mamparos Estructurales

Discussion in 'Software' started by quequen, Jun 2, 2011.

  1. quequen
    Joined: Jul 2009
    Posts: 369
    Likes: 15, Points: 28, Legacy Rep: 199
    Location: argentina

    quequen Senior Member

    Realización del casco de una embarcación de 12mts. de eslora mediante SUPERFICIES-RECUBRIMIENTO utilizando curvas guía.
    Realización de mamparos estructurales dentro del casco, que se adaptan a las modificaciones del mismo.
    La forma completa de este casco puede ser controlada Paramétricamente en tiempo real vinculando las dimensiones a una planilla de Excell.
    Español. 38 minutos de duración.

    http://faudi.adobeconnect.com/p2vjhng7iv2/
     
  2. GHD
    Joined: Sep 2009
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Switzerland

    GHD Junior Member

    Thank you quenquen !
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.