Transom Seal Replacement

Discussion in 'Sterndrives' started by rbonilla, Jun 24, 2009.

  1. rbonilla
    Joined: Jun 2009
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: California

    rbonilla New Member

    I have a Volvo-Penta 5.0 FL (1995) with a serious transom seal leak. The drive is an SX. Is it possible to change this seal without removal of the motor and/or drive? Seems impossible. Any help would be appreciated. What is the best way to accomplish this? Thanks.:?:
     
  2. fasteddy106
    Joined: Apr 2009
    Posts: 72
    Likes: 17, Points: 0, Legacy Rep: 171
    Location: connecticut

    fasteddy106 Junior Member

    The best way to start is to get an SX service & repair manual and see if you still want to attempt this job after reading it. Seloc and Clymer both have manuals for the SX drive. You can get them at any marine supply house or from Boatfix.com. Good luck!
     
  3. PAR
    Joined: Nov 2003
    Posts: 19,133
    Likes: 488, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    You have to yank the drive on an SX. Are you sure it's the transom seal?
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.