total rebuild on a 66 fiberform cuddy cabin

Discussion in 'All Things Boats & Boating' started by 66fiber89, Jul 28, 2010.

  1. 66fiber89
    Joined: Jul 2010
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: newberg, Oregon

    66fiber89 New Member

    i was given a 1966 fiberform and origionaly just wanted to put seats in it and go but i decided i want to rebuild it! ive done cars and know this is a totally new ball game! i got most of the floor out but what else do i need to plan on?
     
  2. hoytedow
    Joined: Sep 2009
    Posts: 5,763
    Likes: 349, Points: 93, Legacy Rep: 2489
    Location: Quam prospectum!

    hoytedow Helmsman

    Look for any rotten wood and replace it.
     
  3. hoytedow
    Joined: Sep 2009
    Posts: 5,763
    Likes: 349, Points: 93, Legacy Rep: 2489
    Location: Quam prospectum!

    hoytedow Helmsman

    Use epoxy rather than polyester to re-glass.
     

  4. hoytedow
    Joined: Sep 2009
    Posts: 5,763
    Likes: 349, Points: 93, Legacy Rep: 2489
    Location: Quam prospectum!

    hoytedow Helmsman

    You may want to re-wire following original wiring template(old wiring harness).
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.