Side Ballast Tank Forming Problem In HYDROMAX :(

Discussion in 'Software' started by Navdes_E, Jul 10, 2011.

  1. Navdes_E
    Joined: Jul 2009
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Turkey

    Navdes_E Junior Member

    Salutations...
    I want to form a side ballast tank in my tanker. But inner hull boundary is really complex surface.. I applied all of process that explained in hydromax manual but i could not do it successfully. Please help me about this problem :(
     

    Attached Files:

    • 11.JPG
      11.JPG
      File size:
      39.3 KB
      Views:
      691
  2. Navdes_E
    Joined: Jul 2009
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Turkey

    Navdes_E Junior Member

    I'm sending the maxsurf file..
     

    Attached Files:

  3. chongboonkee
    Joined: May 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Malaysia

    chongboonkee New Member

    I have attached maxsurf and hydromax file with little bit of modification. have a look
     

    Attached Files:

    • Send.zip
      Send.zip
      File size:
      45.4 KB
      Views:
      157
  4. Navdes_E
    Joined: Jul 2009
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Turkey

    Navdes_E Junior Member

    Thank you very much.. Your advice was really useful. Now, tank plan has changed and double bottom ballast tanks has joined to side ballast tanks. I have to model them in a single piece now.. If i use "Linked tank " modelling way in Hydromax, can i solve this problem? Is this method useful for efficient tank calibrations? Thanks..
     

  5. chongboonkee
    Joined: May 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Malaysia

    chongboonkee New Member

    Yup. Linked tank let you create tank with complicated boundary. you can counter check your tank by generating volume table.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.