ShipConstructor Help

Discussion in 'Software' started by ruminame, Nov 6, 2012.

  1. ruminame
    Joined: Dec 2009
    Posts: 30
    Likes: 1, Points: 0, Legacy Rep: 28
    Location: Dhaka

    ruminame Junior Member

    I want to make a bracket with folded plate system. How to make a folded plate bracket in shipconstructor ?
  2. cRAZY_Canuck
    Joined: Nov 2012
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Australia

    cRAZY_Canuck New Member

    If your making a standard bracket in Manager you might be able to add a folded flange to it before you save it. I've never tried it so it might not work, you'd need to make the folded flange rule before had though. I'd be pretty surprised if that did work but I'd try that one first.

    If that doesn't work you could try making it as a part in Standard assembly as you have greater access to the plate editing tools. It would work there and when you insert you can specify that the plate keeps the Standard Assembly name.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.