Nicol tri needs repair QLD

Discussion in 'Multihulls' started by Corley, Dec 15, 2011.

  1. Corley
    Joined: Oct 2009
    Posts: 3,587
    Likes: 86, Points: 48, Legacy Rep: 826
    Location: Melbourne, Australia

    Corley epoxy coated

  2. cavalier mk2
    Joined: Mar 2010
    Posts: 2,055
    Likes: 36, Points: 48, Legacy Rep: 214
    Location: Pacific NW North America

    cavalier mk2 Senior Member

    It looks like a Cavalier. What did they do to the main hull? Could be a lot of boat for the money.....Severe damage to the main hull....If they pushed the keel through the bottom it is going to be much more of a challenge than say some holing. So the price could be high for the work so the rig and gear should be worth what you pay. Interesting stern extension, if well done. The boat does look nice in the "before" pictures.
     
  3. Corley
    Joined: Oct 2009
    Posts: 3,587
    Likes: 86, Points: 48, Legacy Rep: 826
    Location: Melbourne, Australia

    Corley epoxy coated

    A lot of the value would be in the boats fittings and that I think would decide its fate. Cold molding a new main hull would be quite doable. As we were discussing in the other thread though 15k could be too high in this case as well.
     
  4. cavalier mk2
    Joined: Mar 2010
    Posts: 2,055
    Likes: 36, Points: 48, Legacy Rep: 214
    Location: Pacific NW North America

    cavalier mk2 Senior Member

    Have to see pictures of the damage to know, even the bottom gone is repairable. A new hull could be put in but templates have to come off the hull as Alan Nicol said they didn't have Cavalier plans.
     
  5. taow
    Joined: May 2011
    Posts: 94
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: australia

    taow Junior Member

    looks nice room setup inside, agrees it looks like priced for fittings rather then to buy a boat :p, higher roof then mine, looks it, but some good fit idea's stolen haha
     
  6. glenn oshea
    Joined: Jul 2011
    Posts: 19
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: 1770

    glenn oshea Junior Member

    well the time has come to sell my Hedley Nicol tri built in 1966
    if anyone knows somebody wanting to buy it let me know 0428 352 068 or email advantage.signs@bigpond.com
     

    Attached Files:

    Last edited: Nov 22, 2017

  7. cavalier mk2
    Joined: Mar 2010
    Posts: 2,055
    Likes: 36, Points: 48, Legacy Rep: 214
    Location: Pacific NW North America

    cavalier mk2 Senior Member

    Hey Glenn, if you post pics or links to a ad you will get more people to respond.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.