Needed: CAD designer

Discussion in 'Boat Design' started by Biscayne Boats, Sep 25, 2009.

  1. Biscayne Boats
    Joined: Nov 2008
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Orlando FL

    Biscayne Boats Junior Member

    I am looking for someone to take a rendering and create a CAD file to produce a new Flats-Skiff fish boat. I have a rendering and general specs. CAD design will be need to be complete and detailed enough to send to 5 axis router to create a hull & deck plug.

    Now for the good part, I do not need a high priced designer; one is available at the 5 axis router I am using. This is a very tight budget project that is a second model for my company. I am a start up with an existing set of molds currently in small production.

    Please feel free to email me directly with any comments or questions
  2. Squidly-Diddly
    Joined: Sep 2007
    Posts: 1,916
    Likes: 161, Points: 63, Legacy Rep: 304
    Location: SF bay

    Squidly-Diddly Senior Member

    I'LL DO IT, I'm learning SolidWorks.

    I've only got the Student Version, so you would need to manually re-enter the features or otherwise convert it into CAM readable data.

    Student Version does everything except make files for a robot to read.
  3. Z1K
    Joined: Sep 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Atlanta, GA

    Z1K New Member

Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.