Gypsy

Discussion in 'Sailboats' started by Robert Miller, Apr 29, 2004.

  1. Robert Miller
    Joined: Dec 2003
    Posts: 95
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Rhode Island

    Robert Miller Junior Member

    Regarding the simple Gypsy "Instant Boat" design by Payson/Bolger,
    Does anyone know the design sail area for this boat?
    Weight of hull/rigged?

    Thank you.
    Robert
     
  2. Robert Miller
    Joined: Dec 2003
    Posts: 95
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Rhode Island

    Robert Miller Junior Member

  3. Dutch Peter
    Joined: Aug 2004
    Posts: 645
    Likes: 7, Points: 28, Legacy Rep: 66
    Location: The Netherlands

    Dutch Peter Senior Member

    I'm estimating 150 kg max. You can't lift it on your own,but moving it goes well
     
  4. Slowmo
    Joined: Aug 2004
    Posts: 38
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Scandinavia

    Slowmo Junior Member

    Without rig?
     

  5. SeaDrive
    Joined: Feb 2004
    Posts: 223
    Likes: 1, Points: 0, Legacy Rep: 15
    Location: Connecticut

    SeaDrive Senior Member

    The sail is 64 sq ft according to Sailrite. I'm not sure their arithmetic exactly matches Bolger.

    I guess the hull weight at 150-200 lbs, but I don't actually know. it's a slightly heavy rowboat, but a very light sailboat. A lot of the owners have tried driving it hard in strong winds, apparently because it's a lot of fun to do so, but there have been more reports of broken masts than is usual with Bolger boats. Make sure your mast stock has good grain.
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.