1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

looking for race boat mold 21' or 22' V style

Discussion in 'Boat Molds' started by boob, Apr 6, 2008.

  1. boob
    Joined: Apr 2008
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Gulf

    boob New Member

    hello

    I'm looking for 21, 22 feet race boat mold , I attach some photos for how look the hull I'm looking for ..

    my business is Marine equipments and accessories , I'm new in field boat builders, I do some small projects with out board fishing boats with small motors, so any advises are welcome , specially how the hull will hold 250 or 300hp motor :confused:

    i apologize for the sites i took the photos from . :eek:

    thanks a lot
     

    Attached Files:

  2. RealityBoatCo
    Joined: May 2004
    Posts: 93
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Bucyrus OH

    RealityBoatCo Junior Member

    I'm in the planning stages of one of those myself. I'll send you some pics when I get more planned out.

    [​IMG]
     
  3. boob
    Joined: Apr 2008
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Gulf

    boob New Member

    pleas attach the photos here , i cano't open the link .

    i will be wait to heard from you .

    good look in your project :)
     
  4. Herman
    Joined: Oct 2004
    Posts: 1,618
    Likes: 89, Points: 48, Legacy Rep: 1240
    Location: The Netherlands

    Herman Senior Member

    I tried to contact you, but to no avail using the forum systems.

    Please contact me at hbrouwerjr at brandscomposiet dot nl

    My boss has a mould which you might like. Send me a mail, and I will connect you to him.
     
  5. boob
    Joined: Apr 2008
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Gulf

    boob New Member

    i send you my email address , you should find it in your inbox .
     
  6. Herman
    Joined: Oct 2004
    Posts: 1,618
    Likes: 89, Points: 48, Legacy Rep: 1240
    Location: The Netherlands

    Herman Senior Member

    Received, and forwarded it to my boss. He will respond asap.
     
  7. boob
    Joined: Apr 2008
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Gulf

    boob New Member

    some one snd to Email with tow photos , i don't know if this is your boss or not , but this tow photos is from back of the boat , i need smoe more photos and photos of the mold , size and other fiw information about the boat size .

    pleas inform woh send to me the Emails to writ the meassges in English :confused:

    thanks
     
  8. RealityBoatCo
    Joined: May 2004
    Posts: 93
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Bucyrus OH

    RealityBoatCo Junior Member

    Sure, I can do that.

    Here you go.

    It's a work in progress. I should be starting on designing the deck soon.
     

    Attached Files:

  9. Arenaboats
    Joined: May 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: San Rafael, California

    Arenaboats New Member

    Hello -
    Don't know if you are still looking for race boat molds, but we may have something that you would be interested in, but they are for a 23 footer. Would that work for you?

    These molds are in California, by San Francisco; they are the last molds designed by the late Dan Arena (my uncle), world-record holder, driver and designer of unlimited hydros, and inductee in the Race Boat Hall of Fame.
    He also pioneered fiberglass boat building with the Arenacraft Boat Company, and built high speed raceboats for off-shore competition. Although designed for big block engines, we took the last hull produced and powered it with a 225 E-TEC; it runs about 70. We have pictures of the molds, the 23' itself, and a bare hull that we still have. They are all for sale, but you seem to be interested in producing hulls, so you can have the molds for $3,000,00

    Let us know if we can help you! (Do you have an email address to send pictures to?)

    Dan Arena
     
  10. 13AL
    Joined: Oct 2008
    Posts: 44
    Likes: 1, Points: 0, Legacy Rep: 23
    Location: Sunny California

    13AL Junior Member

    Hey Dan, PM us with a # we might reach you at. We are in the North bay as well and interested. Dan.
     
  11. Arenaboats
    Joined: May 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: San Rafael, California

    Arenaboats New Member

    Location of 23" molds by Dan Arena

    Dan -

    We are located in San Rafael (and so are the molds) at Loch Lomond Marina.
    Our phone # is (415)456-2644; we"d be glad to show you the molds, or answer any questions that you might have, if you give us a call!

    Dan Arena
     

  12. jjjeffcoat
    Joined: Dec 2008
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Bellingham

    jjjeffcoat New Member

    mold construction

    we make boat plugs for molds via 5-axis mill. any design you want. we may even have designers that would work with you on your own custom design.
    jjeffcoat@janicki.com
    :D
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.