Looking for Landing Craft Designer.

Discussion in 'Boat Design' started by Osuf, Jul 18, 2012.

  1. Osuf
    Joined: Jul 2012
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Sarawak Malaysia

    Osuf New Member

    Hi.

    I'm new in this boat industry. Before I can start to setup in this business, I would like to look for any one who can supply me Aluminium Landing Craft drawing and program for CNC cutter. The size of the Landing Craft maybe you can recommend for me as a beginner.

    TQ.
     
  2. Frosty

    Frosty Previous Member

    Why would you want to go into business building something you confess to knowing nothing about.

    The plans for this is nothing compared to ---well everything else.

    In this financial climate even professionals are failing--daily.

    Do you know anything of ally welding or is this the next thread.

    I admire enthusiasm but whhooaaa.
     
  3. Alik
    Joined: Jul 2003
    Posts: 2,843
    Likes: 195, Points: 73, Legacy Rep: 1306
    Location: Thailand

    Alik Senior Member

    We have designed few small landing craft in aluminium before...
     
  4. Frosty

    Frosty Previous Member

    Its a student wanting his homework done for him.
     
  5. Tad
    Joined: Mar 2002
    Posts: 2,303
    Likes: 185, Points: 73, Legacy Rep: 2281
    Location: Flattop Islands

    Tad Boat Designer

  6. SamSam
    Joined: Feb 2005
    Posts: 3,841
    Likes: 171, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    Hello, I'm starting a bank/financial empire, but I don't know too much about it. If everyone would send me money, I'm sure I could figure it out, so I don't really need any advice, but send me money now.
     
    1 person likes this.
  7. dougfrolich
    Joined: Nov 2002
    Posts: 661
    Likes: 21, Points: 28, Legacy Rep: 225
    Location: San Francisco

    dougfrolich Senior Member

    Sam sam,
    Since intreats rates are so low, I,m going to borrow a bunch of $$$$, and send it all to you,just promise me a good return.....what's your address.
    Thanks in advance.
     
  8. SamSam
    Joined: Feb 2005
    Posts: 3,841
    Likes: 171, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    That sounds great, Doug! Depending on the size of your deposit, you might qualify for a promotional combo toaster/cigarette lighter and become eligible for our Grand Prize, a 2013 BMW M6 560-hp Twin-Turbo Coupe informational brochure.
    I'll take this opportunity to post my organization's Prospectus and terms.
    [​IMG]
     
    1 person likes this.
  9. dougfrolich
    Joined: Nov 2002
    Posts: 661
    Likes: 21, Points: 28, Legacy Rep: 225
    Location: San Francisco

    dougfrolich Senior Member

  10. Frosty

    Frosty Previous Member

    Sam sam ille have a bit of that investment, I cant read your small print though.

    However Sam sam reminds me of our little puppies name so im sure you are honest so i'lle still send you the money anyway.

    I hope this investment goes well because all the other investments ive made in the past hav'nt done so well and they did'nt give me back the money, I suppose I should have wrote a letter of complaint.
     
  11. FMS
    Joined: Jul 2011
    Posts: 611
    Likes: 22, Points: 18, Legacy Rep: 227
    Location: united states

    FMS Senior Member

    The first step is to create a detailed list of requirements that will make the craft successful. Identify the demands, what speeds and hauling capacity will make your craft most profitable and successful, the competition in your market, obstacles/dimensional and draft limitations and costs of the operating environment, etc. etc.
     

  12. SamSam
    Joined: Feb 2005
    Posts: 3,841
    Likes: 171, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

    I think I made a mistake in assuming the OP wanted more answers than he actually does. All he apparently wants is names of designers. He got two and I guess he will supply any relevant details to them.

    If you look at the top of this page you see categories, one of which is
    http://www.boatdesign.net/Directory/

    Amongst the resulting categories to choose from is
    , listing 545 designors, and
    , which lists 52 companies. A quick look reveals a likely candidate for the OP,
    http://www.austal.com/ There are many, many more companies listed. I apologize for the thread drift, but if the OP wants answers from any companies he contacts, he should supply some information at the beginning of his inquiries as most companies will not participate in guessing games or in educating the general public.

    But since I started here, I must take this opportunity to answer my valued clientele.
    Dear Mr. Frosty Of Thailand Or Current Resident,
    Don't worry about the small print, my business philosophy is to do the hard work so all my customers have to do is sit back and dream of their almost sure to be future riches and how they will spend them. To that end I supply little actual information, undertaking all the complicated details so the consumers can sit in hot tubs with a bottle of wine and some naked women and watch the sunset. It's funny you should mention it as I have numerous non-profit little puppy, fuzzy kitten and baby duck shelters. In addition my soup kitchens for the homeless, my ministerial duties at the church and my Home For Wayward Girls are fairly demanding, but still leave me wads of time enough to take care of all my clients assets.
     
Loading...
Similar Threads
  1. Squidly-Diddly
    Replies:
    8
    Views:
    347
  2. rael dobkins
    Replies:
    3
    Views:
    299
  3. JINLEE
    Replies:
    1
    Views:
    270
  4. B Goodman
    Replies:
    5
    Views:
    592
  5. Zack668389494
    Replies:
    8
    Views:
    543
  6. Hisees
    Replies:
    11
    Views:
    527
  7. BlueBell
    Replies:
    3
    Views:
    664
  8. Nathaniel Kennell
    Replies:
    18
    Views:
    1,601
  9. Troy Royal
    Replies:
    11
    Views:
    869
  10. robmcg25
    Replies:
    41
    Views:
    1,582
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.