Lancer Power Boats - 1970's

Discussion in 'Powerboats' started by Magictimes, Sep 16, 2003.

  1. Magictimes
    Joined: Sep 2003
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: UK

    Magictimes New Member

    I am new too all this. Computers & Power Boats!!

    I want too know more about Lancer, particularly Corniche derived grp hulls - were (are) they any good.
     
  2. AaronFrench
    Joined: Dec 2005
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: UK

    AaronFrench New Member

    Lancer Marine, Sealance and David Buxton

    Hi, if you are still interested in finding out a bit of info on these craft I think I might be able to help... Send me a pm or email if you are
     
  3. Alfa152
    Joined: Aug 2007
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Malta

    Alfa152 New Member

    Hi mate


    I am the owner of a lancer marine corniche express and any information pictures ect would be much appreciated because I cannot find anything if you have got anything please email me on fentonmalta@onvol.net

    Thanks
    Jonathan
     
  4. Gasguzzler
    Joined: Oct 2008
    Posts: 3
    Likes: 1, Points: 0, Legacy Rep: 32
    Location: Plymouth, Devon

    Gasguzzler Ran out of gas again

    Hi Aaron,
    I have just joined forum & you appear to know something about these boats.
    I have a Lancer Corniche 33 Express & would appreciate any information you have.
     
  5. wet feet
    Joined: Nov 2004
    Posts: 740
    Likes: 132, Points: 43, Legacy Rep: 124
    Location: East Anglia,England

    wet feet Senior Member

    I believe the company that sold them was based at Oulton Broad and a number of the boats were fitted out in Wroxham.The life of the company was fairly short and a number of hulls sat around for a year or two.
     
  6. paul@loughview
    Joined: Apr 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: n. ireland

    paul@loughview New Member

    Have you still got your lancer i'm keen to get one to restore to you know of any . Have you completed yours
     
  7. seamy
    Joined: May 2008
    Posts: 12
    Likes: 1, Points: 0, Legacy Rep: 26
    Location: Ireland

    seamy Junior Member

    i have one if you are interested,needs a total refit, because it is hull and superstructure only,never been in the water?
     

  8. paul@loughview
    Joined: Apr 2009
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: n. ireland

    paul@loughview New Member

    I've emailed u seamy if you dont get it can u let me no
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.