Impeller clearance specs on a 733 Hamilton

Discussion in 'Jet Drives' started by mrtoybox, Jan 25, 2009.

  1. mrtoybox
    Joined: Jan 2009
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: WA

    mrtoybox New Member

    does any body know, or know where I can get the specs on my Hamilton 733? What is the procedure to check those specs?
     
  2. CDK
    Joined: Aug 2007
    Posts: 3,324
    Likes: 148, Points: 63, Legacy Rep: 1819
    Location: Adriatic sea

    CDK retired engineer

    The NZ jet forum is probably a better place to ask such questions.
     
  3. speedboats
    Joined: Jun 2006
    Posts: 139
    Likes: 11, Points: 0, Legacy Rep: 127
    Location: New Zealand

    speedboats Senior Member

    733 or 773?

    Either way, impellor OD to wear ring ID shouldn't be larger than 60thou (30 thou radius / gap between). They can be rebuilt easily enough. You should notice considerable slippage as you mash the gas which'll settle a little as you gain speed (slight over-rev, then the revs drop back a little, probably still a little above normal)
     

  4. tom kane
    Joined: Nov 2003
    Posts: 1,766
    Likes: 45, Points: 58, Legacy Rep: 389
    Location: Hamilton.New Zealand.

    tom kane Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.