How to plot Heeling moment in Maxsurf?

Discussion in 'Stability' started by mactavish, Jun 11, 2015.

  1. mactavish
    Joined: Sep 2014
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: philippines

    mactavish Junior Member

    HI all,

    Please help me how do i plot heeling moment and heeling of wind in maxsurf. And additional. What is the allowable heeling degrees of a ship when loading (tranverse and longitudinal [Trim defection in degress]).

    Thanks and regards,
    "Mac"
     
  2. TANSL
    Joined: Sep 2011
    Posts: 5,656
    Likes: 171, Points: 73, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    You can activate the figure 1 option that will be created a report in Word with the study performed.
    Or you can use the option of figure 2 to print the contents of the active window at all times.
    Allowable heeling degrees : you have to choose the stability criteria that apply to your boat. Hydromax contains virtually all the possible criteria and in them the values that must be satisfied are indicated (see figure 3).
     

    Attached Files:

  3. mactavish
    Joined: Sep 2014
    Posts: 9
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: philippines

    mactavish Junior Member

    Thanks Tansl.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.