Help Needed-Want to bild a mud motor prop

Discussion in 'Props' started by simplebobby86, Oct 21, 2009.

  1. simplebobby86
    Joined: Oct 2009
    Posts: 14
    Likes: 1, Points: 0, Legacy Rep: 13
    Location: Texas

    simplebobby86 Junior Member

    I am looking into atempting to build a prop for the mud motor I'm building. I dont really know where to start. I have welding experience but a prop is a whole other ball game.

    The only reason I am looking into building my own is that I do not want to buy one for $130-$150. I am trying to keep this build as low cost as possible so if you know where to get a cheap prop for a mud motor please let me know.

    Any help would be appreciated.

    Thanks
     
    1 person likes this.
  2. pistnbroke
    Joined: Jan 2009
    Posts: 1,405
    Likes: 33, Points: 48, Legacy Rep: 404
    Location: Noosa.Australia where god kissed the earth.

    pistnbroke I try

    go to DIY marinization and look under Weedeater conversoin you will find youngs props are used a lot ..dont forget to check if its left or right rotation!
     
  3. simplebobby86
    Joined: Oct 2009
    Posts: 14
    Likes: 1, Points: 0, Legacy Rep: 13
    Location: Texas

    simplebobby86 Junior Member

    Thanks for the tip.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.