FreeShip Grid

Discussion in 'General Computing' started by fredrosse, Nov 16, 2007.

  1. fredrosse
    Joined: Jan 2005
    Posts: 341
    Likes: 23, Points: 28, Legacy Rep: 56
    Location: Philadelphia PA

    fredrosse USACE Steam

    The FreeShip version I have gives twenty frames, and a grid with a spacing that is not too usable, (such as 1ft - 1.6 in, 2 ft 3.2 in, etc.) on the bodyplan view. Is there a way to change the number of frames, and to change the grid, for example, to 1ft - 0 in spacing?

    Thanks in advance for any help.

    Fred Rosse
     
  2. Guest625101138

    Guest625101138 Previous Member

    Fred
    Go to menu <Calculations> <Intersections...> and choose Stations. Bin all the existing Stations and then select +N. Just set the spacing you would like for the stations.

    You can do the same thing for waterlines, buttock lines and diagonals.

    These settings go all the way through to give you the required grid in any orthoginal views.


    Rick W.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.