I have available for local rent only currently here in Summerville, South Carolina [if you can drive to pick it up, you can rent it].
Magnum Venus Products
Pro Rider 22:1 ; Pro Rider Gelcoat System - Magnum Venus Products https://www.mvpind.com/product/prorider-gelcoat-system/
w/ ATG3500 external mix spraygun ; Air Trigger Guns https://www.mvpind.com/product/atc-chop-gun/
It can spray at a ratio of 1.5 to 3.25% initiator (9% MEKP recommended), up to approximately 6000 cps viscosity without any issues. Use it to spray gelcoat, VE barrier coat, Duratec 707-002 surfacing primer, or any other low-ratio peroxide initiated coatings. If you have application questions, don't hesitate to ask.
6 cfm @ 100 psi to run, so it can run off of most medium size hobby air compressors. My Craftsman 2hp/26gal runs it just fine.
For pictures and booking:
Meister Integrated Composites, LLC https://www.facebook.com/MeisterLLC
or
meistercomposites at gmail dot com
On site training also available.
Magnum Venus Products
Pro Rider 22:1 ; Pro Rider Gelcoat System - Magnum Venus Products https://www.mvpind.com/product/prorider-gelcoat-system/
w/ ATG3500 external mix spraygun ; Air Trigger Guns https://www.mvpind.com/product/atc-chop-gun/
It can spray at a ratio of 1.5 to 3.25% initiator (9% MEKP recommended), up to approximately 6000 cps viscosity without any issues. Use it to spray gelcoat, VE barrier coat, Duratec 707-002 surfacing primer, or any other low-ratio peroxide initiated coatings. If you have application questions, don't hesitate to ask.
6 cfm @ 100 psi to run, so it can run off of most medium size hobby air compressors. My Craftsman 2hp/26gal runs it just fine.
For pictures and booking:
Meister Integrated Composites, LLC https://www.facebook.com/MeisterLLC
or
meistercomposites at gmail dot com
On site training also available.