Fluid overflow point for tanks / open holds in Maxsurf/Hydromax

Discussion in 'Software' started by Devu De Goa, Jul 31, 2015.

  1. Devu De Goa
    Joined: Jul 2015
    Posts: 58
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: European Union

    Devu De Goa Junior Member

    Dear Sirs,

    I would like to know if it is possible to define overflow point for fluids in Maxsurf modules.

    In specific cases like the large angle stability of split hopper dredgers or trailing suction hopper dredgers which have open holds, we need to consider the reduction in displacement due to spilling of excess spoil at higher angles of heel. It is needed to consider that the fluid is lost to the sea. It appears that Maxsurf considers constant displacement at all angles of heel so it doesn't actually spill the spoil fluid.

    Best Regards,
    Devu
     
    Devu De Goa, Jul 31, 2015
    #1
  2. Devu De Goa
    Joined: Jul 2015
    Posts: 58
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: European Union

    Devu De Goa Junior Member

    Okay. Thank you very much everyone.
    I got this reply on the Bentley Community:
    "Yes, version 21 of MAXSURF (currently in Technology Preview (or beta test)) has a "spilling tanks" capability. The final version will be released in September 2015. If you are a MAXSURF user with permissions set to allow download of early access versions then you can download and try out this feature otherwise you can access it when it is released."
     
    Devu De Goa, Aug 1, 2015
    #2
Loading...
Similar Threads
  1. LowelandSystem

    Free fluid simulation software

    LowelandSystem, Jun 20, 2016, in forum: Software
    Replies:
    8
    Views:
    2,553
    TANSL
    Jul 4, 2016
  2. RThompson

    Kinda cool fluid simulation thingy

    RThompson, Aug 2, 2012, in forum: Software
    Replies:
    1
    Views:
    1,644
    CWTeebs
    Aug 4, 2012
  3. stonedpirate

    Fluid dynamics software?

    stonedpirate, Nov 28, 2009, in forum: Software
    Replies:
    3
    Views:
    2,000
    Ad Hoc
    Nov 28, 2009
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.