Building materials blunder..

Discussion in 'Boatbuilding' started by cookiesa, Jun 12, 2014.

  1. cookiesa
    Joined: Mar 2007
    Posts: 122
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: Launceston, Tasmania

    cookiesa Senior Member

    Can not believe it, had dramas getting the right weight cloth (plans were for 330gsm, had to get 450gsm, uni and bi)

    Cut out and stitch first hull together, thinking things are going well when flicking through the plans looking at laminating schedules (glassed inside and out then bulkheads installed) (stitch and glue design 24ft Cat) and. I notice 6mm ply specified for hull sides....... I'm sure I ordered 4mm.......... Oh poooooooop!

    Waiting on response from designer regarding changing laminations or of having to go up to the 450gsm cloth will already be sufficient

    Check and double check materials!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.