Aqua Lark hull repair

[Doyle33]

I bought an aqua Lark over the summer to be a winter project. Once I split it in half under the seat was thin and had holes. Any pictures of how they are built under the glass? I read a earlier post pretty much asking the same thing but no responses. Any advice would be greatly appreciated. Tia, Todd

 

[bajansailor]

I found this Aqualark for sale on the net - they look like very neat wee boats.
Rare 1979 AQUA LARK 2 PERSON BOAT http://yachtsboatslist.com/other-makes/67008-rare-1979-aqua-lark-2-person-boat.html

Here is a photo of the cockpit area with the seat -

Re how you 'split it in half' - did you separate the deck moulding from the hull?

You mention that 'under the seat was thin and had holes' - are these holes in the hull shell itself?

 

[Doyle33]

I found this Aqualark for sale on the net - they look like very neat wee boats.
Rare 1979 AQUA LARK 2 PERSON BOAT http://yachtsboatslist.com/other-makes/67008-rare-1979-aqua-lark-2-person-boat.html

Here is a photo of the cockpit area with the seat -

View attachment 173293

Re how you 'split it in half' - did you separate the deck moulding from the hull?

You mention that 'under the seat was thin and had holes' - are these holes in the hull shell itself?

I believe mine is a bit newer. It's a two piece boat,the hull and top are separate,riveted together. The seat is molded in the top part. I started pulling up the old fiberglass. Wasn't any wood left. I'm currently pulling out the foam. Thanks for posting .

 

[Ike]

you might want to watch this video on youtube

These boats were used by Disney and others. Do a search on Aqua Lark and you will find quite a few hits.