+++a Naval Architect from Persia looking for job+++

Discussion in 'Services & Employment' started by sharifi, Dec 2, 2006.

  1. sharifi
    Joined: May 2006
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 7
    Location: iran

    sharifi Junior Member

    Hi All
    I am a naval architect from Iran.
    i would like to find a job in Middle east Specially in UAE
    in bellow you can find my CV
    Best regards
    M. Sharifi
    Tel:+98 7633417-2118
    Email: mhdsharifi@yahoo.com
    Po Box: 79145-3736 ,bandar abbas, iran

    Personal information:
    Date of Birth: October1978
    Habitat: Bandar Abbas\ IRAN

    Naval Architect from Tehran Polytechnic University (AMIR KABIR University) (1998-2002)


    08-2002 up to 06-2003:

    Structure dept., design & engineering office, ISOICO Shipyard:

    In this period I worked for preparing shop drawing for structure and hull outfitting dwg.

    1- Lunching barge 10000 tons
    2- Tanker Barge 5000 tons
    3- Deck Cargo Barge 5000 tons

    06-2003 up to now:
    Head of machinery Group, design & engineering office, ISOICO Shipyard:

    In this position I am prepare machinery installation (procedures and shop dwg) and also design machinery foundations, checking related P&ID & maker dwg, and … with my team.

    1- 1200 ton Landing Craft Project:
    2- 5000 tons Tanker Barge:
    3- 2200 TEU Container Carrier Project:
    4- 35000 tons Product Carrier Project:

    Part time Works:
    Amvage Boragh Company (from 2001 up to now):
    1- Treemaran (wave pursier) boat: Hull basic design & making model
    2- Fiber glass Trawler 400 ton: Hull basic Design& Stability Booklet.
    3- Passenger Catamaran 70 Persons: Hull Basic Design & Stability Booklet

    Arvandan Company (10-2004 up to 02-2005):
    1- Initial design and making Spec. for a 12.5m catamaran Hydrograph.
    2- Initial design, making Spec. and design P&ID diagram for a 12.5m Multicat boat.

    Abilities in computer:
    • AutoCAD 2006
    • Mechanical desktop 6
    • Tribon (Outfitting Modules)
    • Maxsurf
    • Hull form
    • Rhino ceros (a beginner)
    • Microsoft Office (Word, Excel, Power Point Microsoft Project, Access) & …

    Training Courses:
    • Marine Diesel Engines in ISOICO Shipyard
    • Auxiliary Machinery (for 2 Month) in Emden- Germany
    • Tribon Software-Outfitting Modules (for 1 Month) in New Castle- UK
    • KAIZEN term in ISOICO Shipyard

    Skills and Abilities
    • I am a naval architect but my experience is in machinery group, therefore I can work in both fields (naval architect and mechanical engineer)
    • Completely Familiar with Machinery in Engine Room & Machinery Sys. In Merchant Ships
    • Completely Familiar Wit DIN, IACS, BV, GL and NKK Standards.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.