21 Mt Oil And Garbage Collector / Help Needed

Discussion in 'Boat Design' started by Mojito, Nov 14, 2010.

  1. Mojito
    Joined: Nov 2008
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Turkey

    Mojito Junior Member

    Hi ,

    This a school project that i have to design of the hydraulic crane, lifesaving appliances, electronics and aerials .

    All 3 things have to be under lloyd limitations .

    I uploaded the GA plan of the boat .

    I really have no clue where to start . I appreciate for your opinions helps .

    Tech Specs .
    OIL AND GARBAGE COLLECTOR / BOOM PUTTER VESSEL

    Length o.a. 21.50 m
    Length b.p.p. 19.20 m
    Beam 6.00 m
    Depth 2.50 m
    Draught (design) 1.50 m
    Draught (scantling) 1.50 m
    Deadweight (at scantling draught) 50 tons
    MCR (option 2) 2x261 kW
    MCR (option 1) 2x313 kW
    Speed (at design draught)(option2) 9.0 – 10.0 kn
    Speed (at design draught)(option1) 8.0 - 9.0 kn
     

    Attached Files:

  2. gonzo
    Joined: Aug 2002
    Posts: 14,449
    Likes: 638, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    I can't open the attachments. If they have what the title says, start by trying to satisfy each requirement. Then see how they interact and what compromises you need to make. What level of school are you in? Did they teach you the design spiral?
     
  3. nikezz
    Joined: Aug 2010
    Posts: 35
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Asia

    nikezz Junior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.