Looking someone to make a Maxsurf Project

Hello everybody,

I´m having several problems with a project. It´s a fishing vessel. I´ve finished the hull but I´m finding impossible to model the tanks. Can somebody help me with my project? I will pay for it

Thanks!!!

 

Attach File

 

Pesquero

I looked at the Pesquero design in Maxsurf. I strongly recommend starting with one of the Maxsurf example designs in order to model the basic hull form, then modify it to suit your shape requirements. In that way you will have the best approach to creating a control net that is manageable and which you can easily fair. A 'stock' Maxsurf example is attached.

Depending on which version of Maxsurf you are using, you should find a selection under the "Surfaces" menu which will allow you to add transverse or horizontal or vertical planes, or cylinders, etc., which you can then modify for use as tank boundaries...

 

Pesquero

Sorry, the attachment did not make it. Second try here...!

 

Advice

Hi,
I can give the following advices:
1. Save only surface 1 and 2. Everything else should be removed.
2. It is necessary to correct surface 1 /Shell plating/ in CL. If you will make visible the whole vessel you will see an error.
3. Make the deck - surface 3.
4. It is necessary to fix the Zero Point and AP, FP, BL
5. Make sections, buttocks and WL
6. Select gravity of water and make account of hydrostatics for some draft, approximately ½ -¾ depths.
7. Save the msd file and cover Maxsurf Modeler.
8. Open Maxsurf Stability and open the same file. Here it is necessary to inject into the table all tanks, such as you want - look in the Manual.