Looking someone to make a Maxsurf Project

Discussion in 'Boat Design' started by littlemole, Apr 13, 2014.

  1. littlemole
    Joined: Apr 2014
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Spain

    littlemole New Member

    Hello everybody,

    I´m having several problems with a project. It´s a fishing vessel. I´ve finished the hull but I´m finding impossible to model the tanks. Can somebody help me with my project? I will pay for it

    Thanks!!!
     
  2. littlemole
    Joined: Apr 2014
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Spain

    littlemole New Member

    Attach File
     

    Attached Files:

  3. classic
    Joined: Dec 2006
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Arizona

    classic Junior Member

    Pesquero

    I looked at the Pesquero design in Maxsurf. I strongly recommend starting with one of the Maxsurf example designs in order to model the basic hull form, then modify it to suit your shape requirements. In that way you will have the best approach to creating a control net that is manageable and which you can easily fair. A 'stock' Maxsurf example is attached.

    Depending on which version of Maxsurf you are using, you should find a selection under the "Surfaces" menu which will allow you to add transverse or horizontal or vertical planes, or cylinders, etc., which you can then modify for use as tank boundaries...
     
  4. classic
    Joined: Dec 2006
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Arizona

    classic Junior Member

    Pesquero

    Sorry, the attachment did not make it. Second try here...!
     

    Attached Files:


  5. Rabah
    Joined: Mar 2014
    Posts: 247
    Likes: 7, Points: 18, Legacy Rep: 50
    Location: Bulgaria

    Rabah Senior Member

    Advice

    Hi,
    I can give the following advices:
    1. Save only surface 1 and 2. Everything else should be removed.
    2. It is necessary to correct surface 1 /Shell plating/ in CL. If you will make visible the whole vessel you will see an error.
    3. Make the deck - surface 3.
    4. It is necessary to fix the Zero Point and AP, FP, BL
    5. Make sections, buttocks and WL
    6. Select gravity of water and make account of hydrostatics for some draft, approximately ½ -¾ depths.
    7. Save the msd file and cover Maxsurf Modeler.
    8. Open Maxsurf Stability and open the same file. Here it is necessary to inject into the table all tanks, such as you want - look in the Manual.
     
Loading...
Similar Threads
  1. xellz
    Replies:
    36
    Views:
    2,868
  2. Bkram22
    Replies:
    0
    Views:
    715
  3. robmcg25
    Replies:
    41
    Views:
    920
  4. Schoolbus
    Replies:
    23
    Views:
    1,375
  5. upchurchmr
    Replies:
    3
    Views:
    823
  6. MurphyLaw
    Replies:
    4
    Views:
    553
  7. Wellington
    Replies:
    8
    Views:
    805
  8. Wellington
    Replies:
    12
    Views:
    1,024
  9. bjdbowman
    Replies:
    22
    Views:
    2,331
  10. Barron Cohen
    Replies:
    5
    Views:
    897
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.