3D hull and equipment models from the internet

If we agree, that this is the solution we are looking for, then we should develop a strategy to get the boat equipment suppliers on the road to do so.

Yipster, do you have any connections towards Vetus or others in Holland?

Cheers

Bernd
 
archnav.de said:
If we agree, that this is the solution we are looking for, then we should develop a strategy to get the boat equipment suppliers on the road to do so.

Yipster, do you have any connections towards Vetus or others in Holland?

Cheers

Bernd
Click to expand...
since about everyone uses acrobat i'm glad to see it working but have to make one free test pdf 8.1 to see what is all possible

do think 3d support should be actually in windows and wrote microsoft years back about these things as it still does not even carry a virus scanner

i more than agree on using pallets and libraries, boat equipment too when possible ( long as experts stick the more serious drawings together ;-)

have a good day and i second your quest
 
The Acrobat Reader 8.1 is of course free for anyone, but to create a 3D-PDF file you have to use the expensive Acrobat 3D software. You can download a 30day trial version from the Adobe side. If you have done so, we should further communicate on this topic.

Cheers

Bernd
 
my first pdf ever and in 3d, well sort of a test, used a concept and like to see if some vaque obscure pics together with all the balony with errors is visible, i know, its messy, i'm inpatient
3d acrobat pdf v8.1 has a little learning curve, even in the viewer, having a hard time to pan or find back the model, maybe its becouse i rush things, anyway, later further ah, and must say i was more impressed, mayby still am with vrml in 92 and 97
 

Attachments

So never the less, your 3D-pdf file is a very good starting point, with all the different information, documents, links and models. To make it perfect is only a question of time.

One little tip, it is better to use the second bottom from left to turn the model. Zooming could be done with the wheelhouse. In this way your first model works very well. Further on you could define previews during the creation of the file.

In the other cases there must be something beside the model, so that the centre of the 3D-box is fare way from the model. Something like a large plane or so.


Cheers

Bernd


I hope others will also join the discussion.
 
Hey Yipster,

it is much simpler to discover your models then I thought.
Open the assembly tree completly, zoom a part with a right click selection and then turn and zoom it. Enjoy it.

Cheers

Bernd
 
Bernd I have looked at some of the information on adobe acrobat 3D from their web site and on the face of it looks promising for a conversion/delivery system. I think the take up rate for small uses may be slow due to the cost and in the end you still end up with a iges or step file and how your own native cad handles that file type. Also this system will work for supplier data but might be a problem for peer to peer if your cad is not supported.
 
bhnautika,
Thank you very much joining the discussion. The first and most important item is, that there is available, with the free new Acorabat Reader 8.1, a CAD-Viewer on all computers. The viewer is working great in all aspects.

Have you installed already Acrobat reader 8.1?

Cheers

Bernd
 
i come to like the acad type of dimension tool in the pdf 3d viewer witch enables full scale 3d sizing
 
yipster said:
i come to like the acad type of dimension tool in the pdf 3d viewer witch enables full scale 3d sizing
Click to expand...

Yipster
What did you mean by acad type of dimension tool?

Cheers

Bernd
 
much more seems possible but i like the 3d dim tool in peticular
here a sample screenschot in meters
 

Attachments

  • dim tool.gif
    dim tool.gif
    185.9 KB · Views: 580
so i can even size your bolts and nuts :D
 

Attachments

  • manhole.gif
    manhole.gif
    109.4 KB · Views: 519
But this is up to now only available in the expensive Acrobat 3D.

Have you explored how to navigate with the assembly tree? Zoom to a part, turn around with the part in the middle?

Cheers

Bernd
 
Bernd I downloaded Acrobat 8.1 and seems to work as advertised. I think it has great potential as a marketing tool. Giving people the ability to interact with 3d models.
The Step file that was zipped, how was that done? Was it done with acrobat 3d or the normal way.
 
You must log in or register to reply here.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

    • Similar threads

    G
    Freeboard splashwell Panga hull
    Replies
    4
    Views
    344
    Skip Johnson
    S
    B
    Vent placement on stepped hull.
    2 3
    Replies
    31
    Views
    1,982
    Bob Rosa
    B
    D
    Possibility of building a reinforced concrete/ferrocement hull in sections
    2
    Replies
    18
    Views
    1,725
    gonzo
    gonzo
    S
    Hull Design Choices for Very Fuel Efficient Live-aboard
    3 4 5
    Replies
    61
    Views
    6,577
    HelmutSheina
    HelmutSheina
    C
    Are these metal sheets viable for a basic hull?
    Replies
    6
    Views
    982
    kapnD
    K
    Back
    Top