@Dolfiman thank you for providing the spreadsheets! Here are the offsets from the chined spreadsheet imported via a macro into Rhino3D with sails...
Thanks, the details make it more fun to play along. Here is the rig only with a line drawn like a topping lift (not a sail plan). [ATTACH]
I'd like to hear about the donor rig, perhaps the P,E,I,J, and ISP... and perhaps add it to the image I posted earlier. [ATTACH]
I can't say I totally hate it...you are using about 16.1m^2 of shell with this deck so far, perhaps another couple 'quadratmeter' (sqm ) in...
Bitte!
What materials are you familiar with/able to obtain/considering for a build? Stitch and glue with marine plywood might be nice for a first...
I was able to read in the OBJ and STL outputs into Solidworks 2022 at the office, and could see the surfaces, etc. I am not a regular user of...
Are you making a male mold, and having to split it in half and/or into layers to fit the CNC machine? [ATTACH]
In the picture I made above, the 'loft' command was used to make a surface defined by the green lines and stopped at the end. Have you tried the...
You could try 'saveas' to 3D DXF curves and loft those in SW. Here is what it would look like in Rhino3D, lofting the green stations and the one...
An extensive Hartley thread on WoodenBoat, need to join to see pics: Another Hartley TS16 restore. - The WoodenBoat Forum...
I would say it's not worth the headache. Once broken the situation becomes a mess to get home and clean up. If the sailing grounds are that bad,...
Welcome to the forum. What are you thinking to use for a final finish on the cover? -if gelcoat, the materials will need to be gelcoat compatible...
I have two of the older HF ones used for sanding surfboards and recently used one on a small wooden boat. The best upgrade is getting the Velco...
Mine has steam-bent pine as a gunnel. I was going to do white oak but got talked out of it. Hiding the plywood edge would be a nice touch.
