and look at this one as well http://www.liveauctioneers.com/item/7662714
Just seen another one for sale, but this guy says there was only 12 made !!!!!! here is the link to it...
there was brand new boats exactly like this a few years back in the uk. they were made by Donzi. and was at a dealer for Donzi boats. its was...
My transom thickness is 1 1/2 inches of wood inside the fibreglass. the total thickness on the outside is a fraction under 2 inches. The transom...
Thanks par. the reason behind thickening up the hull bottom is that its just so thin. if i put down 3 layers it would be double the thickness it...
Today done a bit more grinding and a lot of looking as well. then after having a long look, i then sat down and done some thinking. The thinking...
These pics show the inner shell plywood was not as far across the inner shell as i propose to make the new ply, old wood 37 inch, new wood will be...
The ply on the hull/outer shell will be tabbed and also some mat and epoxy going round the sides of the hull and from ply to floor etc by around...
I have found a place to get epoxy resin and will after some serious thought will be using epoxy resin instead of the polyester on the transom....
Ahh thats good to know about not having to wait between layers of resin and matt. its better for me to lay it up thicker all in one go to be...
What thickness is the transom and what horsepower can it take ? or what horsepower are you running ? i heard that glastron stopped using wood...
There is a correct term for this type of thing,its called a Sales Gimic. It dont work and very easy to see why it dont actually work. for a ram...
I see what you're saying about the epoxy being better. 'But if i can coat the whole lot of wood and encase it in fibreglass matt and resin before...
Ahh 1.5inch total thickness !!! I have way over that already if including the hull and inner hull thickness at the transom. the wood alone is...
found out today that the transom is not 1/2 thick fibreglass at all. its about 1/8th thick of glass and there was another pice of wood that was...
