As has been recommended use an epoxy primer Awlgrip 545 roll on 3 or 4 coats (following recoat time window)
sand all smooth with 320 grit
Guys I want to make and install a cockpit deck on my boat
It is a 12 foot X9.5 wide area
Would like to use Vinylester resin and hand lay up
I wanted to get some advise on spraying gelcoat webbing.
I have used in the past but have not been happy with the results
I used the percentage...
I have some small fish holds maybe 150 quart in size
They are rectangular in shape and constructed of Corecell and glass
I am looking for...
Thanks for the replies
Thanks for the reply
It is fresh
I was afraid of that
What would you recommend to remove the wax ? I would use Acetone and a stiff scotchbrite...
I would like to know what is the recommended solvent to dewax a flowcoated Gelcoat surface to prepare for a 2 part LP paint, I plan to do some...
Sounds like your Gelcoat already has wax in it
Thanks for the input guys
I will contact Paul
Can you recommend an epoxy for bedding stainless steel fuel tank fittings in a composite fuel tank.