Laminate over the core . Yes? Not sure I understand the question. Not sure how else to apply. But anyway, it’s amazing how much you learn as...
I didn’t build strictly to the plans. I raised the freeboard, carried the full beam of hulls all the way astern, widened tunnel top and...
The AST tenders are alarmingly similar to the OC tender, and 85 lbs is truly impressive. However, it’s not a catamaran design, its dimensions are...
Well, that’s interesting you compare the glider since I built that boat. While it was fun to build it is a rowing catamaran by which its nature...
What’s the beam on your 10’ cat plans and what sort of horsepower rating are they giving?
2 layers of 9 oz each side. 50/50 cloth resin ration hand layup of course
Hey Fallguy, The outer hull sides are solid carbon epoxy, no core. They’re 4 layers of 9 oz. I did a layup of 3 and didn’t like it. Just didnt...
What would be your comparison?
Launching this boat went well enough but 3 things surfaced that we hadn’t seen before now. The first was the stainless sheet metal wrapped over...
No, this was my own design.
the outer sides are 4 layers of 9 0z warp carbon/epoxy. No glass. We did 2 early sea trials to mark water line and look for water rising up lower...
A year or so I asked the group about building a catamaran dinghy, layup schedules etc. attached is a picture of the boat completed. It’s carbon...
Hi Will, Thank you for your post and interest. There was a water tank under the vberth I expect 65 gallons or approx 550 lbs. I’ve replaced this...
I got an email back from diab on bonding sheets of divinycell, but wasn’t able to share due to copy, share...blah, blah, blah. Regardless, the...