After quite a bit of number crunching, evaluation of my fiberglass skill level and time available it appears that a bolt on aluminum bracket may...
Excellent thank you, any thoughts on proper density? My research indicates 8 or 16 pound might be the best choice.
3" seems to be the maximum thickness I could use for the transom, barring a jack plate. What would be the best composite construction? 2" coosa...
What would be the best way to fill the prop tunnels with foam? Build a mold around the underside and fill with pourable foam from the top?
This may surprise some folks but this vessel performs as a planing hull. Originally outfitted with twin 160 hp diesel engines she put in a top...
Hello again everyone, I’ve got another potential project. This one may be a little more involved than the last one you can see here:...
I think I've got it now... Used the boat diesel calculator. With1.51 gears I should see a top rpm of 4200 with the same props.
Hmm I guess I don't follow. All things being equal, the only change is the HP and the gearing. I am keeping the hull and running gear the same if...
Here is what I have now: 160hp diesel 4000 rpm engine with a 1:1.92 ratio, 2072 rpms at the prop WOT, with a top speed of 21.8 mph I want to...
I hire a hydraulic lift trailer for launch and takeout, no slings!
Fairing on but not sanded
Glass on
Fillet 2