would you ( or anybody) NOT use a release agent at ANY time ?..I`ve used spray releases & wax type releases but I`ve never NOT used a release...is...
I think one of us may be misunderstanding the other guy ..& it may be me ?? this would be "tooling" gel coat applied to a "plug".. not to produce...
how bout applying it?..i hear gel coat`s "shot" on..& depth & depth consistency is measured with that little notched tool...is it shot on with a...
now that you mention it I guess if the names not on the list the c/g has I guess it cant be taken
im currently designing an aluminum instrument / control console for project in the design phase,.. I work with aluminum but would like to learn...
I went to the Newport boat show in RI this weekend & met a man from a propshop called accutech outta dover nh..(his names larry (603)617-3626...
why not ??,I have the full page promotional ad for hot boat all figured out....introducing boeingcrafts newest edition to its HIGHLY prestigious...
thanks guys..i went to the Newport (RI) boat show & found a product to suit me ,its called ez fair & its a 2 part epoxy type fairing compound that...
im the guy that's built a couple boats in my small shop that's working toward launching my first production type recreational boat to sell &...
bruce Roberts is a good designer with detailed step by step instructions on the whole thing from the giddyap...im a smalltime fabricator & my...
so there is a distinction ...loa, lod, lw ...I guess its a no brainer ...length over ALL, is just that....length over ALLLLLLL ,,& I guess its...
I wonder if it works with fiberglass well because its a polyester product ?..this begs the question of why does plastic body filler work on...
ive used lightweight "fairing " compound on f/g boats in the past for very thin fills over a small area ( say a foot square) that were shallow (...
good example ..I like that its ISO
thanks bud...that's about what I figured ..I guess its gonna vary a little from builder to builder
it makes sense to me that the beam should be measured at the waterline & the loa should be measured as if you did it with a giant set of calipers...
right!...it looks like one of those things George barris or the coop put together in the 60`s ...my original thought was that it was a 1 off...
you're right ...I don't have MUCH experience with that kind of bending I actually own a very small manual version of a piece of equipment similar...
pvc fence extrusions filled wit spray foam?..lightweight ,strong , available in a large selection of sizes from 1 x 1 & up to 4 x 4 , easy to work...
you could try a call to your local welding supply shop & see if theres an adapter available...ive had to do it twice now & ive found theres...
