Search results

Okay, thanks. So, would h116 be a similar metal to h111 as far as workability? This temper seems to be a little more available on my end...

So I'm seeing several temper designations on 5086. I intend to form/ bend the rise on the bow with ratchet straps and turn buckles, and I'm looking at 3/16" thickness. So I'm wondering what temper best suits the ability to work with it in this manner, and which one will be the best for welded...

Thank you for that well thought out response and advice. This would be my first boat build, and I'd be doing the welding (pulsed mig). I'm a certified welder for all metals, a Journeyman in machine building/repair, and 20+ years of experience in fabrication. So I've welded a ton of aluminum...

I'm considering building a 18ft mod V boat. Roughly 7 ft chine to chine, 5052 H32 bottom plates (3/16) and 1/8 sides. I know a good number of manufacturers use 5052, but it seems they mostly use H34, H36, variants of 5052. I understand they are somewhat stiffer, but also not as readily...