Search results

Hello All I am doing a gel coat blister repair job on my balboa 26'. Way to many to try to fix each one so I started stripping off gel coat to bare glass and grinding out any bad areas, looks like hundreds of air pockets in the outer layer of mat and the glass is solid on the outside of them...

Hello All On a Frame member in steel it calls for 2" x 1/4" flat strip, in the plans to convert to aluminum it calls for 2-1/2" x 5/16" in a 5086 or 5083 grade. Now if I wanted to convert that to 5052 H32 and use a L shape. Yesterdaay I experimented a bit and sheard a 5" wide strip of...

Hello All I had mentioned on another thread that the wife and I desided to build the Roberts 345 MC steel for a retirement boat, So I orderd the plans while they were on sale. Thought I was getting printed plans and paterns but to my suprize no only CD version, So I take them to a blueprint...

Hello All As per Brents request I scanned a few drawings from the back of his book. Not the best quality with my scanner but readable Tom

Hello I have a complete used merc stern drive system for sail Its the 350 v8 engine and alfa drive. the out drive part was bought new in about 1996 and only has about 50 hours on it. The engine from what I was told was rebuilt in Florida before he moved out here to California with it and...