Search results

  1. A

    Modeling Boat Velocity During Acceleration & Deceleration

    If thrust and resistance be linear function of velocity, velocity will be exponential function of time: ma=T-R mdv/dt=av-bv dv/dt=[(a-b)/m]v v=exp{[(a-b)/m]t+c}
  2. A

    extracting body lines from 3D cad model

    Thanks a lot dear TANSL for your reply. can you say with more detail what should I do in Rhino? Does it need Archcut plug-in?
  3. A

    extracting body lines from 3D cad model

    thanks
  4. A

    extracting body lines from 3D cad model

    hello Is there any way to extract body lines from 3D cad model of a ship directly in a software?
  5. A

    Planning hull resistance test in towing tank

    Dear friends Do you have any reference, experience or suggestion for very small model (Lwp= 60 cm) planning hull resistance test in towing tank (without any appendage)? e.g. for bringing in shaft inclination effect on pitch motion or other considerations concern to differences with conventional...
  6. A

    CFD codes for surface piercing propellers

    Dear Ciro, I saw your web site. available picture for SPP modeling shows your minuteness in modeling of complicated physics of phenomenon. I used Ansys CFX and made a preliminary model for a propeller in partially submerged condition using rotating domain and multiphase flow. I used a tight...
  7. A

    CFD codes for surface piercing propellers

    hello friends. I need some information about CFD codes for surface piercing propellers. Can you help me?
  8. A

    CFD codes for surface piercing propellers

    I need some information about CFD codes for surface piercing propellers. Can you help me?
  9. A

    CFD codes for surface piercing propellers

    I need some information about CFD codes for surface piercing propellers. Can you help me?
Back
Top