Your second drawing has the planks lapping opposite of how lapstrake boats are usually built. The bottom edge of the sheer plank would be lapped...
Looking at a Fenwick Williams design, his hulls were much more shoal. Modest freeboard. but beamy firm bilged centerboarded shapes like cat...
Another mini ship by Tad Roberts. http://www.tadroberts.ca/services/small-boats/files/images/brig/SmBrig03-S.jpg
Try the search term brigantine, Bolger drew a mini one as other designers have over the years.
Here is something along a similar theme. https://www.duckworksmagazine.com/15/projects/fang/#.YgkC7MuYWV4
I don't know if you have seen these sorts of videos, materials are "free" if you have access to a wood lot to gather some branches and splints....
Some teams seem to be refining their previous years entry. [MEDIA]
i have wondered why all jangada have forward raked dagger boards, although they are boats kept on beaches....
I am not too keen on that experiment, perhaps it is best done with a model boat first rather than invest in all that material for something that...
One week ago you said : "I have some experience in the actual fabrication part of a pipe like that. It's not that different from building an MDF...
Considering an advanced surfski has a 19" beam and a OC-1 outrigger canoe has an 16.5" beam it will be quite impressive if you can balance in a...
Some one once told me a story about how his father was up sold to a bigger boat by the boat builders; who told him that the ends of the boat are...
Sorry, unless the boot of your car is like Dr. Who's Tardis and bigger on the inside than outside your are not going to fit all that gear and a...
Seem to be some plans for a purse seiner Shenadoah here. Category:HAER No. WA-178 (Purse Seiner SHENANDOAH) - Wikimedia Commons...
Raka epoxy is considered generic and economical as a brand. RAKA Resin & Hardener Kits https://duckworks.com/raka-resin-hardener-kits/
The genre of narrow Victorian era English boats are described as plank on edge English cutters, or six beam English cutters. Even a 30 ft six...
What you are suggesting has been tried but not as extreme as 2.5 ft beam. for a 30 footer. it is a very tender hull form prone to flooding even...
The designer Rob Denney is an active member of this forum, and last posted in the multihull forum.
Comparing Bristol Channel pilot cutter plans to a Collin Archer, the Bristol is long and lean, so a faster hull form....
Someone last month had the same idea. Stripped Down Simplistic Wakeboard Boat...
