HMS Victory watch?v=lilNP4LnSh0
Pretty is out because each of the laminations came from a different piece of lumber. I made them from T&G Flooring. Kind of expensive but they...
If you are using rift sawn... I assume you alternate the angle with each course? I had thought to go Vertical, Rift, Flat then Rift (opposite...
I did a search and didn't come up with anything like what I want. I would like to get peoples' info/opinions on various grain orientations and...
This is what I got... 5 16' DF 2x10s with some semblance of vertical or rift sawn grain and few enough knots to provide some decently clear,...
How do you get 16' and 20' lumber home with a 6.5' pickup bed? Thus: [img] You don't go on the highway... You don't go under low bridges......
Here is one that I did than has had a number of builds. The boat in the picture was a request for a deeper boat (included in the various model...
This morning's efforts... it's mostly done, except for a small lip on the upper side of the sliding shelf, and the outside storage (I haven't...
Here's the shelf unit I made Yesterday... [img] [img] There was less than 1/4" space to get the box in between the 2x4 running along under the...
The past few days I have been busy trying to get my garage changed from junk pile to shop. I was able to get a couple of Crates from work and I...
Sorry about the picture size... comes from another site.
With a chainsaw yet! this [img] to this... [img] [img] [img] [img] done by Jonathan Archer
I had seen pictures of smaller examples but I thought that one might be a foam rubber exaggeration. I can see why they would be threatened... Meet...
Is that thing REAL?
I'm impatient so I figured a way of lowering the boat, table and all. I was able to cut and fit the vertical DB case spacers and I trimmed the...
I guess you corrected it. I see now, exclude the url part of the address and just put in the video identifier... the youtube tags take care of the...
Now THIS is a joint! W1pvUlQgYtk https://www.youtube.com/watch?v=W1pvUlQgYtk anyone know why I can't seem to get a youtube video to embed here?...
I still use Carene 2008 to start a hull, then import into Freeship (usually 2.6).
It's hard to admit when you've been stupid, but... I can't reach into the boat. I mounted the building framework onto one of those plastic folding...
Not that kind of cleat... not yet anyway. These are cleat material to support the deck/seat etc. Strips of 1x1" doug fir to glue and screw to.
