Rich perhaps a photo of what you have would help everyone better understand what you have.
Yes indeed, quite a mystery. Somethings afoot!
Interesting hull: Regular monohedron (constant deadrise) with a 'bow pod' attached. Operations in following seas could be 'fun' and yet you can...
Keep in mind that when towing, the tug may not be moving fast (under 4 knots - ) but under full power so the amount of cooling needed may be 150%...
At 54' this is larger than being discussed. The owner was very resourceful and saved a tremendous amount of money. Unfortunately he passed away...
a 40'-45' trawler for US$ 100k ?????. I suggest you really examine this. If your final objective is to go boating you might be better off to buy...
Have you built a boat before?
probably 'keel coolers' - to cool the engine(s).
agreed Some tread plate is good, some is not. I have used the PAM test: Get a sample sheet (buffed, paint, tread plate, etc) added with a light...
If you have used your 'driver' on regular steel, buy a new one (and mark it) for the SS so you don't get carbide transfer which will make the...
This type of omnidirectional 'vessel' has been done before and mariners worldwide have found it immensely useful. Comes in various colors & paint...
Bluebell is right plus Check: (a) the center of weight location(s) so you don't have heel, trim, etc. Your 'house' is at one end so you may need...
Good luck... we are praying for you. Dealing with weight, don't forget added weight like 'people', outfit, supplies, etc.. My favorite was a...
Wonderful: Sails of steel mounted on a buoy. Should make a good radar target until it capsizes.
There are charts showing (your dealer may know) 'lead' hole vs screw size number. I have used Robertson (square drive) for years (they've been in...
If you can manage without a shaft, How about a (a) sterndrive (inboard outboard) (b)a surface drive (Arneson). Efficient, Proven, & 'off the...
Agreed Nothing wrong with good non skid and it's the best, especially if you have non boaters aboard - like a passenger/tour boat. The buffed deck...
my choice would be silicon bronze Robertson (square) drive.
Most local aluminum fish boats just buff up the aluminum with a course grit (# 16) grinder. Technique has worked well for the past 60 years We...
Try going to your CAT dealer and asking them. Even an installation book could be handy. Fernstrum is a good source for coolers. Making your own......
