Sorry they cannot be the same, battens have both material and dimensional properties which govern the way they curve in 2d space. Even the...
This is where I get confused between the physical and the metaphysical. So how do I get the battens and the curves into the computer?
Laax the Palmer boat is a totally different hull form and material to the Admiral so the hull structure will be totally different so comparing...
Yes here are two deck heights and sections bow and mid
Laax Its not just the structure of the hull but also the curvature of the hull sides as you move down into the boat that determines how much space...
Yes ndar a very good video, and I would recommend it to those studying design. TANSL here is a real example, same boat from different angles....
Laax here are the two new sizes in one dxf drawing.
Laax is this what you're after, deck and lower deck, scale is in metres
Laax don't get to side tracked by the “boat thing” as vessels in your size range the interiors are more house like than “boat”, yes you have to...
Sarralexander as well as David’s suggestion of “Blount”, may I suggest the Eric Sorensen book “Guide to Powerboats” as a good all rounder. Also...
cruising tri 18 m
explorer yacht
lake boat
So do we think, Pounds per inch immersion (PPI) in this case wouldn't easier L(ft) X B(ft) X 5.333 (salt water)= PPI LXBX5.2 (fresh water)= PPI
Doug the bump on the leading edge of the foil could be from the work of Dr Fish (true name)...
Alexjblake when you modelled the hull in maxsurf did you bond edges or do any trimming? Also how did you export out and in what format? The...
Hi alexjblake welcome to the forum. The STL file had some issues with mixed surface normals, some going in, some going out they need to all be in...
It seems so.
Northwindii you can have this older design to sketch on, its close to the dimensions you stated. I can give you a PDF to print in 1:200 scale in...
