Trace you have to set up the zero point position in the data menu first go to “frame of reference” set up base line and dwl. Then go to “zero...
AnONY 123 when you import into maxsurf you can change the import parameters for the file to a line the model to the correct alignment, also it...
I have been wondering what is the thinking behind changing the “gallery”. Most sites I have been on, when you go to the “gallery” you expect to...
mcm as the hull is a double ender I am guessing its water plane area will be less so heave will less for its displacement. B/T (wl beam/draft) of...
Mcm how about this shape. Heave can be influenced by more than just mid section shape , L/B ratio, L/disp, radius of gyration and wave spectrum....
It seems my assumptions about the mid section shape are wrong as more information comes to hand (21 degree dead rise). So is this close to the...
Q1 all three Q2 Yes I am making some assumptions but light displacement boats tend to have flattish bottoms coupled with the flared sides would...
Mcm the use of the words flam and flare is generally used (I have found) for around the bow area and flam is seen to be more advantages as it...
Concept drawings,3d rendering are just the design equivalent of a hypothesis. You have to have ideas before you can test them. Some will work some...
It always strikes me as a modern take on a 17 century ship.
So guess who did this http://www.feadship.nl/en/fleet/yacht/wedge-too
Tom in the 3d view on start up, down in the left hand corner is the editor type box,select and go to the user preferences, then the themes tab, go...
papiylon when you you import surfaces into maxsurf only take in one side of the hull (port side) and let maxsurf create the other (symmetrical)...
SukiSolo I did not mean it in the literal sense it was a reference to the past, why draft the lines then create a surface when you can create a...
This is not about whether I have sprung a few battens or not (pure conjecture). Its about the physical world of laying down curves on a drawing...