Justinet maxsurf is not a general CAD program even though its getting a few of those basic features for generating surfaces, it is limited....
Justinet as Tansl has said, look at bonded edges,there are two possible ways to archive what your after in maxsurf ,either with two surfaces or...
I flipped the surfaces and had no problems. I would also do what Tansl suggested
Livia try flipping the surfaces/control points to the other side.
SamSam not a lake, ocean in a remote part of the Kimberly in northern western Australia ( buccaneer archipelago region). Big tides,big rivers,...
Jolly what's missing is water![ATTACH]
HJS I agree (as mentioned in post 33) but getting enough deck area on a mono hull (beam/length) for the solar panels seems to be a choke point....
My thoughts on getting flat solar panels but getting self righting in the cat and no fin keel on the mono. Enclose panels with curved clear...
Given the deck area requirements ( for solar panel) a catamaran maybe a better fit.
BlueBell have a look at any self righting life boat, all have ”good stability and ability to recover from capsizing” I haven’t seen too many with...
Anelito you don’t need a long deep fin keel and bulb to make a boat self righting, its just a lot of drag and something for things to hook on to....
Mike thanks for the tip. I was probably a little flippant when I used the term at “best a cosmetic touch”. Another thing I have lean't is that...
Tansl while the picture is nice you didn’t mention anything about shape and speed, which one would be more efficient as speed increased ? This...
Tansl have a good look at the picture again. The curved stern is at best a cosmetic touch to a flat transom,it is above the waterline so “stern...
Tansl an error, really! More like a compromise, having a classic rounded stern but enabling modern propulsion systems, azimuth thrusters maybe,...
Vishal the amount of stiffness you can choose depends on the number of points in a column or row. Always try to use the least number of points to...
Vishal the surfaces doesn’t match the markers so you may want to rethink the accuracy you want, perfect or best fit, the surface stiffness in the...
The number of points and their stiffness must match to join, other wise the edges are different. Always ask yourself do I need so many markers and...
Vishal at a glance you seem to have two hulls in the same space, the editable hull has inconsistencies between surfaces that make up the hull, the...
Sywofp good luck with your new project if you go ahead.
