Its a 91 model. But its not a ss, st, or sx engine. Carefull not to over rev or rev until warmed up. Connecting rod lenght is much longer than the...
Look up the firing order for 302 and also 351 and compare to yours. They are a little bit different
Volvo is the answer.parts availability for stringer 800 may be an issue in the near future. Volvo 280 is the toughest outdrive ever produced....
If its not a planing hull shaft angle is not so critical, as long as engine lubrication is not a issue
Any eay i can help e mail me at boatbuilder41@gmail.com
I can email you the artical.if you want to check it out
Yes , basically the same, a little bit different. But about 1/3 the time and a whole lot less money. Plywood soaks up a lot of resin. Fiberglass...
Check out the boat i just built from these same panels.just look at my pics in profile.its featured in national fisherman magazine march 2013....
If you want to last a lifetime and want to get by cheaper.i have fiberglass sheets 30foot long and six foot wide x 5/16" thick.....you can build...
Im new to this site, but i grew up building boats and commercial fishing. It is said that lifes most valueable lessons learned are learned from...
No. If you think about. Back in the older days salt was used to preserve meat.no fear unless you got a steel boat
My son now has my 12 ft plywood boat i built in 89 or 90. Still in good shape for its age. But we avoid standing fresh water ,never leave life...
Total difference in salt water and fresh......... fresh water will rot wood much faster
Dont rely on any resin sticking to pressure treated wood for very long. And careful to avoid plywood without exterior glue between layers, like luan.
I agree with tom. Its just a matter of opinion. None of my plywood hoats were marine grade
Gluv-it .skip the glass if you feel you can make waterproof seams. Avoid standing water inside when not in use. Avoid oak leaves in boat.if...
Marine plywood alone is good for ten years. How big of boat are you building?
My experiance glassing both sides is one little pin hole and the boat gets water logged. It can never dry outcausing premature rot
I have some of these sheets . I use them in a lot of my builds. I just have 12 sheets i would like to sell if it would help anybody out. I am in...
