This will be my first post of a series documenting building a cabin on a pontoon boat.I will be posting details and photographs as needed so as to...
I don't have ready access to my b'n'laws boat,he lives about 2 hrs from me.I will however be documenting my on build which will be very similar to...
The boat I pictured in the earlier post is my brother-in-law's,he's removing the rear two side windows and replacing them with sip so he can...
Yes,I'm gonna start posting my build with pics as I go.Man I wish my boat was 26' even 24';my boat is a 20' but the deck is actually 8x18' with a...
Here's one build using the 2" square tubing and structurally insulated panels[foam between to thin alum sheets].Rear side windows are being...
I can tell you that the boat I have pictured is very stable and planes well.The material is light weight and quite sturdy.The frame is 2" square...
My bother-in-law suggested I document my build since it is ground-up and would cover the complete process.My boat is a 20' Palm beach and has a...
He said they were 30 ft long and 21.5" x 19" He is going to add a third pontoon because he intends to make his more like a house boat,with water...
The pics you see are of my brother inlaws boat.He is taking the rearside windows out and replacing them with sip so he can add modified foldup...
An alum 2" square tubing for the frame and structual insulated panels,the kind they use for walk-in freezers,light and well insulated.
I'm in the process of removing the old "carpet" covering from my pontoon deck.I'm going to use a two part paint [epoxy] that comes with color...
pics of boat Hope I did it right.This thing has light weight windows and roof was designed for sunbathing.I spec fished overnight in the winter...
Best idea I've seen is using 2" square tubing for the frame and structural insulated panels,the kind used for walk-in freezer etc;thin alum sheet...
