G'day Brett, Can you message me a contact number.... I'd like to take a couple of measurements from your hull if that's ok.
G'day Brett, I will probably take you up on that when I get a but further down the track. We have started a Yahoo Group for Mirror 16 owners if...
My apologies to those who have been following this........ I have been through another redundancy/job hunting stage so the Mirror has gone on the...
Templates The hull templates are just about completed. The first image below shows the templates for the hull's bottom and side panels. The...
Disassembled at last.........
Latest photos Latest photos below.............
Hi Mike, I would use a digital camera to check under the floor. Have a look at the trailer that has been used with the boat. If it supports the...
G'day Graham, Thanks for your post. I have a model in freeship based on measurements taken from other peoples hulls, but it is difficult to get...
Progress first photo: The floor templates are completed and the remaining floor panels and the foredeck framing have been removed. second...
Rig photos Hi Steven, There are some reasonably detailed photos of a rigged Mirror 16 on the top of page 13 of this thread. I reckon you could...
Mirror 16 register Hi Steven, There is a bloke over your way called Barrie Skelcher who used to race a Mirror 16 back in the 70's. He is...
Thanks Chuckles :D What sail number is your Mirror 16?
Progress photos I finished removing the side tanks and have started pulling up the floor. The remaining floor around the edges is the original...
G'day Thud, I have a copy of the Mirror 16 Assembly Manual that came with each kit, but it does not mention the component size. There are a...
Part size Hi, Can anyone give me the width and depth, to the nearest 1/8", of the internal vertical member on the Mirror 16 transom (see...
Update Hi All, I have been sidetracked from the Mirror 16 rebuild for the last few months while I have been repairing and refitting three...
Hi Stefaan, The boat you have is a Mirror Dinghy which has a length of 10 foot 10 inches. The boat that we have been discussing here is a Mirror...
The rebuild looks great Dan! Did you make the new ribs the same as the old ones or did you beef them up?
Hull measurements Hi All, I have finished measuring the external dims of the hull. I have attached the results as a table, and a dxf with the...
Mirror 16 Class Measurement Rules The measurement rules I am referring to are the Class Measurement Rules for the Mirror 16, attached.
