This is going to be a salt water fishing rig. The toons are plastic and unsinkable, In the bays, oysters reefs can sink aluminum toons and this...
Question. I recently needed a way to support the extra weight i added to my pontoon/cabin boat. I came up with a way using 2pcs 23"dia x 35"...
I am carrying a boat load of US dollars. I need to a loaf of bread.
[ATTACH] With economy, maybe it is time. If it is time, here are a few things I have learned while building my little arc. [ATTACH] If you're...
6" WIDE WEIGHS 1.49LBS/FT AND $1.00 A POUND. Comes 60' long [ATTACH] If i were building, All light gauge galvanized steel. Pontoons and...
[ATTACH] Thanks for the info. More of a modified center console pontoon.
[ATTACH] This is something I am going to do after I finish my weekender. I live on the Gulf Coast and finding the fish in the shallows presents a...
thinking out of the box is what made this country. the problem now is, they gave away the box. I am about 60% finished building my 29 foot...
Styrofoam in pontoon I obtained prices for 10' section of 20" dia. 1/8" 5052 pontoons formed with the flat sections on the bottom and side. All...
Thanks for help, nice to see a forum where egos aren't king. [IMG] This is what i came up with after talking to you'll, 40 dia with strakes...
Sold, the premier is what I was getting at in my last post. So, 42" x 18" with a angle 45 or 60 on the bottom 2 coners. .091 Alum in front 12'...
Thanks good info, What about this , Alum flat on the bottom, then break a 45 angle on both side, then back to 90 angle \____/ ? Turn it over...
http://forums.iboats.com/attachment.php?attachmentid=106440&d=1312513608 I just installed this, it works great.
Thanks for your views, Wouldn't the turning radius and skidding be effected at higher speeds? I plan on a 300hp. Your right labor would eat you...
I have just put a light weight steel floor and cabin on my Crest 28' and It is working very well. Now I would like to design and build a Quad toon...
